Specs for 20" space saver.
-
- Posts: 27
- Joined: Thu May 12, 2022 2:51 pm
Hi Phorridge, sorry, can't help with your question but if you find a suitable wheel, could you post the details and a link to the supplier if possible. Thanks
Ok I've managed to find the wheel stud spacing (not from dealer or Renault UK who've yet to respond)
It's 114.3mm
This matches the Kia EV6
https://www.thewheelshop.co.uk/product/ ... esent-day/
So I've ordered the kit and will test it out.
It's 114.3mm
This matches the Kia EV6
https://www.thewheelshop.co.uk/product/ ... esent-day/
So I've ordered the kit and will test it out.
Kit arrived and tested.
Wheel works fine.
It's quite large but sits on the boot floor fine.
The sissor jack is 3T but as the car is very low the initial jacking is harder but it did lift it.
The car has locations front and back on the sill join to jack on.
It also comes with the wheel brace that worked fine.
So all in all a result. Feel happier now I have a spare.
The jack and wheel brace (plus a small square of ply wood O made in case on soft ground to go under the jack) all fits in the compartment with the charging cable. But if you use the charging cable a lot then I'd leave it curled up in the centre of the spare wheel as the spare wheel blocks lifting the cover for the cable tray.
Wheel works fine.
It's quite large but sits on the boot floor fine.
The sissor jack is 3T but as the car is very low the initial jacking is harder but it did lift it.
The car has locations front and back on the sill join to jack on.
It also comes with the wheel brace that worked fine.
So all in all a result. Feel happier now I have a spare.
The jack and wheel brace (plus a small square of ply wood O made in case on soft ground to go under the jack) all fits in the compartment with the charging cable. But if you use the charging cable a lot then I'd leave it curled up in the centre of the spare wheel as the spare wheel blocks lifting the cover for the cable tray.