Fitting dashcam

All Megane Electric related discussions
Post Reply
Phorridge
Posts: 147
Joined: Fri Dec 23, 2022 5:32 pm

Post by Phorridge »

Has anyone removed the centre roof plastic (that holds the 2 lights and SOS button?

PXL_20230205_163022354.jpg

I'm hoping there maybe a switched 12v feed in there as running a cable across the roof and down the screen looks to be a task and a half.

ArtyBee
Posts: 8
Joined: Wed Jan 25, 2023 8:28 pm

Post by ArtyBee »

I've tried to remove the panels when I fitted my dashcam but aborted on the basis they seem reluctant to move. I've run the cables inside the panel gap between the two sections of the mirror / assembly where they're mostly hidden and then tucked them behind the rooflining, across and behind the A pillar trim panel then down behind the door seal to the lower dash. It's not difficult to do but requires some care and I'd recommend getting some panel removers before attempting to remove the trim. I've learned from previous experience that screwdrivers and trim panels don't mix !
sinlessUK
Posts: 150
Joined: Tue May 30, 2023 6:15 pm
Location: Nottinghamshire

Post by sinlessUK »

Did you tap into the fuse for the cigarette lighter?
If so what type of fuse is it so I can get the right fuse tap adaptor.
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
DAS
Posts: 27
Joined: Wed Feb 01, 2023 10:46 am

Post by DAS »

I've bought x2 Nextbase bundles, including hardware kits, one for the Megane & one for my Wife's CH-R. I've now ordered micro 2 tap cables (amazon is my friend here). At least the fuse box in the Megane is in the cabin. I've confirmed the 12v socket fuse - Renault still lable it as a cigarette lighter fuse (how quaint!) The CH-R will require more work as I'll have to find a grommet through to the cabin, or just use the supplied 12v plug.
Nextbase in their blurb do say the mini tap cable will fit the micro2 and this may be the case in other cars but not the Megane as the fuse box plastic moulding stops that.
sinlessUK
Posts: 150
Joined: Tue May 30, 2023 6:15 pm
Location: Nottinghamshire

Post by sinlessUK »

Also from my own experience, Nextbase will send you the correct fuse tap FOC seen as you have purchased their kit.

Be good to see your final installation. 🧐
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
DAS
Posts: 27
Joined: Wed Feb 01, 2023 10:46 am

Post by DAS »

Well that was easy. Temporary fitting using the 12v outlet cable while I wait on the micro 2 tap cable to arrive. I've installed a Nextbase 320XR front/rear set. Both cameras attach to mounts with strong magnets.

Image
The power cable. The ferrite is slightly annoying but it's hidden with the tolltag fitted.

Image
Power cable down to fuse box. Excess hidden here.

Image
Power outlet

Image
Power cable & rear camera cable, twisted to stop Ferrite from hitting off anything.
User avatar
gpsguido
Posts: 3
Joined: Sat Dec 02, 2023 8:43 pm
Contact:

Post by gpsguido »

I have used the micro 2 adapter and routed the cable to the mirror.

IMG20231105110719.jpg

IMG20231111154837.jpg

Screenshot_2023-11-11-21-39-54-20_40deb401b9ffe8e1df2f1cc5ba480b12.jpg

The camera has a parking Mode cable that will check the power setting.
Model Garmin dashcam 45
Viny87
Posts: 1
Joined: Sun Jan 14, 2024 2:12 pm

Post by Viny87 »

Hello, thanks for information and just question .... where you fitted earth cable??
Thank you
Viny
sinlessUK
Posts: 150
Joined: Tue May 30, 2023 6:15 pm
Location: Nottinghamshire

Post by sinlessUK »

Viny87 wrote:
Sun Jan 14, 2024 2:14 pm
Hello, thanks for information and just question .... where you fitted earth cable??
Thank you
Viny
Have a look here >> viewtopic.php?t=299&start=10 <<
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
User avatar
ghijo86
Posts: 10
Joined: Thu Jan 11, 2024 9:10 am

Post by ghijo86 »

Which one is the tap for the parking mode (always ON)? The one attached to the multimedia fuse?
Thanks
gpsguido wrote:
Sat Dec 02, 2023 9:02 pm
I have used the micro 2 adapter and routed the cable to the mirror.

IMG20231105110719.jpg

IMG20231111154837.jpg

Screenshot_2023-11-11-21-39-54-20_40deb401b9ffe8e1df2f1cc5ba480b12.jpg

The camera has a parking Mode cable that will check the power setting.
Model Garmin dashcam 45
Post Reply