The fuse board is covered in fuses ( over 59) but the cover only shows a few being used.v12 in all.
Is this right?
What do the other 40 fuses do? And am I right these are Micro2 fuses?
I'm leaving oking at adding a dash cam and the empty fuse place next to the lower RH 10A fuse seems to come on and off at 12v with the power on.
Are there really only these fuses?
Did you tap into the fuse for the cigarette lighter in the end?
If so what type of fuse is it so I can get the right fuse tap adaptor.
If so what type of fuse is it so I can get the right fuse tap adaptor.
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
In the end I tapped into the Cigarette Lighter fuse.
Been working well for nearly 3 months.
https://topcashback.co.uk/ref/simon | https://surfshark.club/friend/Fbv9yqHV | https://share.octopus.energy/flax-elm-797 | https://electroverse.octopus.energy/network/sign-up?referralCode=flax-elm-797 | https://app.tronity.io/signup/QJJDFDC6
By the way, the top console where the cabin lights and SOS button comes off really easily. There is both 5v and 12v power. Considering how many people have dash cams it would have cost nothing to put a little USB port.
Before you ask, I did tap into the 5v power but it does not switch off when you leave the car and the dash cam eventually just goes to sleep and you have to press buttons etc etc.
Before you ask, I did tap into the 5v power but it does not switch off when you leave the car and the dash cam eventually just goes to sleep and you have to press buttons etc etc.